How to properly use brazed diamond tools?

Brazing technology can achieve chemical metallurgical bonding of diamond, bonding agent (brazing alloy material) and metal matrix interface, with high bonding strength. Due to the high bonding strength at the interface, only a thin bond thickness is needed to firmly hold the abrasive grains, and its exposed height can reach 70% to 80%, making the use of abrasives more full and greatly increasing the life of the tool And processing efficiency. Brazing technology has very good development prospects in the diamond tool manufacturing process, and this technology should be industrialized as soon as possible.

1. Multi-purpose saw blade—— it is clamping Cutting operation on portable cutting machine or fixed table cutting machine;

2. Grinding disc wholesaler—— it is clamped on a portable grinder (grinding machine) or a fixed desktop grinder for grinding work;

3. Multi-spec drill distributors—— It is clamped on various types of drilling rigs for drilling operations;

4. Special-shaped grinding wheel for stone——it is installed in special grinding equipment or special-shaped inverted Grinding and forming operations on angle machines.

Note the use matters:

Brazed diamond tool grinding discs, saw bodies, drill bits, shaped grinding wheels and other products should pay attention to the following points during use:

1. During the operation and operation process, various products can be passed through cooling water without special use of cooling water.

2. The operation process must be low in force, and should not be stressed, or the force is too strong, the desktop fixed machine eats less power every time.

3. Do not hit or pry during the operation.

4. Install a safety shield on the equipment that holds the product to prevent the product from being damaged due to improper use and flying out of the body.