how is the arix diamond segment made?
- Author:Dora Zhang
- Release on:2022-06-01
(1) Firstly, the upper indenter of the automatic cold pressing die is processed, and the pre designed lattice small spherical columns are distributed on the top of the upper indenter;
(2) The pre alloyed matrix powder and diamond are respectively granulated. In the process of coating and granulating, diamond needs to be made into spherical particles with uniform size;
China arix diamond segment on sale manufacturer,diamond longitudinal arrangement is interlaced, which can ensure the continuous diamond exposure and stable cutting.
(3) Adjust and reform the program of the automatic cold press, put the diamond and matrix powder into the hopper of the automatic cold press respectively, and realize the feeding of matrix powder and diamond respectively;
(4) After the carcass powder is fed unilaterally, the carcass powder is pressed into small sheets. Because the upper indenter has the spherical property of a predetermined arrangement, the surface of the carcass sheet is pressed with small round pits corresponding to the predetermined arrangement;
(5) Drive the diamond cart to feed, then scrape away the excess diamond, and then gently re press once, and the diamond is formed by orderly arrangement of thin compacts,
Diamond cutting segment for lava stone to get the even and smooth slab,to produce slabs in very short time,easy manipulation and with low cost.
