Why is the problem that the saw blade cannot be cut, the teeth are lost, the working noise is loud？
- Author:Dora Zhang
- Source:www.boreway.com
- Release on:2020-10-08
Analysis of common problems of diamond saw blade cutting stone:
The diamond saw blade cannot cut:
1. Insufficient cutting edge;
2.Insufficient power supply.
3. The hardness of the cutter head is too large;
Wet Use Turbo Blade Porcelain Disc
The service life of diamond saw blade is short:
1. Insufficient water supply;
2. The voltage is unstable;
3. The conveyor belt is slack;
4. The ceramic saw blade in the correct range is not selected.
T Segment Less Chipping Diamond Cutting Disc
Diamond saw blade cutting noise is loud:
1. Insufficient water supply;
2. The material to be cut is not fixed.
3. There is a problem with the speed setting;
4. The width of the saw blade head is too small, causing friction between the substrate and the cutting material;
Circular Saw Blade for Ceramic
Diamond saw blade loses teeth:
1. Sudden external impact encountered during cutting;
2. The material to be cut is not fixed in place;
3. The material problem of the material being cut (usually hardness);
4. The temperature is too high due to the problem of insufficient water supply.
