What is the sharpness of diamond saw blade?
- Author:Dora Zhang
- Release on:2022-07-08
The exposed speed of particles is determined by the holding force of the matrix binder of the cutter head. The stronger the matrix holding force is, the slower the diamond particles are exposed and fall off. On the contrary, the weaker the matrix holding force is, the faster the diamond particles are exposed and fall off.
Therefore, t segment circular diamond sharp cutting blade.The stronger the holding force of the carcass, the weaker the sharpness of the knife head. The weaker the holding force of the carcass, the stronger the sharpness of the knife head.
However, the faster the exposure speed of diamond particles is, the more serious the friction and impact wear is, so the particle falling off speed is also faster, the faster the longitudinal density of diamond in the working layer of the tool bit matrix is, the less the number of diamond layers in the working layer of the diamond matrix is, and the service life of the tool bit is shorter.
Not only andesite, our diamond segment cutting supplier china can cut granite, marble, sandstone and other kinds of stone, and can cut large slabs and blocks.
It can be seen that the relationship between the sharpness and wear resistance of diamond cutter head is mutual restriction and mutual growth. The higher the sharpness, the lower the wear resistance; on the contrary, the higher the wear resistance, the lower the sharpness.
