Home > News > Industry News > What do we need to pay attention to when we use angle grinder to slot and cut slices?
Contact Us
Contact us: Fujian Nanan Boreway Machinery Co.,Ltd.,ADD: HuaHui Center, Shuitou Town,Quanzhou, Fujian, China,                 ...
Contact Now
Follow us
Latest News
  • The physical properties of diamond

    Diamond is one of the largest mineral hardness. Diamond can be divided into two categories according to the causes of natural and man-made. Natural di...
  • What is the thickness of the base of the ultra-thin saw blade?

    Ultra-thin diamond saw blade refers to high-precision special-purpose diamond cutting blade.According to different bonding agents, the production is divided into metal bonding agents, resin bonding agents and electroplated diamond cutting blades.
  • Production technology of diamond segment?

    The manufacturing process of BOREWAY mechanical diamond segment is divided into 5 steps, which are batching, mixing, cold pressing, hot pressing ...
  • What Is Lavina Quick Change Diamond Concrete Grinding Shoes?

    Descriptions: What Is Lavina Quick Change Diamond Concrete Grinding Shoes? Our Lavina diamond grinding shoes are mainly used for grinding concrete, a...
  • Profile Of Brazed

    Brazing is lower than the parent metal melting point of solder metal materials,will be heated to a temperature higher than the melting point solder, w...
  • The definition of the resin

    Resin is usually refers to the scope of heated after soften or melt, softenedunder the action of external force has a tendency to flow, when the tempe...
  • Why can not diamond blade machining steel?

    Above 800 degrees Celsius, the diamond powder dissolves in iron. Use of diamond cutting tool turning iron material, as a result of friction heat, diam...
  • Can 125mm bush hammer plate be used in concrete?

    Bush hammer plate can remove old epoxy coating, renovate different kinds of ground surface, and make antique effect. Effective and safe anti slip granite, granite, marble and concrete surfaces. Preparation for grinding and polishing of concrete before laying new layers.
  • What saw blades can cut jade?

    It is widely used for cutting gems, stone, and hard and brittle materials such as glass, ceramics, and graphite.
  • How To Choose The Right Grit For The Diamond Grinding Cup Wheel?

    Describe: How To Choose The Right Grit For The Diamond Grinding Cup Wheel? Diamond Grinding Cup Wheel metal bond diamonds have high strength, e...

News

What do we need to pay attention to when we use angle grinder to slot and cut slices?

Dora Zhang www.boreway.com 2020-07-31 16:58:28
Cutting wall groove in decorationHand held angle grinder is usually used for convenience Install the slotted cutting blade and connect the electricity The angle grinder sold by boreway factory can be sawed quickly with a little effort. If the saw is deviated or there are burrs, rub it with the saw blade.


Tuck Point Blade

While the hand held angle grinder will use diamond cutting blade when cutting, the cutting blade is the most commonly used tool in the grinding process. When used, the angle grinder can drive it to rotate at a high speed. It can grind, slot and cut workpieces of different materials.


Hand Held Angle Grinder

What should we pay attention to when we are using angle grinder to slot cutting pieces?


-Before use, make sure they are in good condition and the electric tools are equipped with protective covers; 



-The staff must wear protective covers and work clothes; 



-The cutting blade shall be installed on the electric tool correctly, and the rotating speed of the electric tool shall not be higher than the maximum speed of the slotted cutting blade; 


-The cutting blade cannot be used as a grinding disc; 



-Do not use too much force when cutting and grinding; 



-Before installing a new cutting blade, be sure to turn off the power supply of the electric tool and pull out the socket plug;


-Before cutting and grinding, let the cutting blade work idle for a while; 



-Do not use the cutting piece without reinforcing mesh on electric tools;


-It is forbidden to use damaged equipment; 



-It is forbidden to block the cutting blade in the cutting seam; 



-When cutting or grinding is stopped, the rotating speed should be stopped naturally. It is strictly forbidden to apply pressure to the slotted cutting blade manually.




Tuck Point Blade

In the common cutting tools, Tuck Point Bladesand grinding disc is the most used, their use function and shape are very similar.



The slotted cutting piece can be used to cut the wall with high cutting efficiency and precision. Diamond cutting blade is composed of matrix and diamond cutter head. It is mainly used for cutting non-metallic materials, such as stone, ceramics, concrete, etc.