Maintenance method and use requirementsof diamond saw blade
bourne
Boreway machinery
2015-09-10 20:44:22
Diamond saw blade maintenance methods:
1.Diamond saw blade if not used
immediately, should be flat or using the inner hole should be hung, flat on the
diamond saw blade can not pile up other goods , and pay attention to
moistureproof, prevent rust.
2. When diamond saw blade is not sharp, cutting
surface is rough, must be in a timely manner to grinding. Grinding can not
change the original point of view, and destruction of dynamic balance.
3. The
inside diameter of diamond saw blade is fixed and the positioning hole processing,which must be conducted by the manufacturer. If processing bad, will affect the
product use effect, and may be dangerous, In principle, no more than
the original aperture 20 mm for reaming, lest affect the balance of the stress.
Diamond saw blade use requirement:
1.At working, artifacts should ensure that are
fixed, profile positioning conforms to the turning direction, so as not to cause
abnormal, not to the lateral pressure and curvilinear cutting, feed to smooth,
avoiding the blade impact contact artifacts, resulting in broken saw blade, or
artifacts, there was an accident.
2. At working, found abnormal sound and
vibration, cutting surface is rough, or produce peculiar smell, must be
immediately put an end to the work, timely check, troubleshooting lest produce
an accident.
3. At the start and stop cutting cutting, don't feed fast, to avoid
damage to broken teeth.
4. If the cutting aluminum alloy or other metal, to use
special cooling lubricants, in case of saw blade overheating, tooth paste, and
other damage, influence the cutting quality.
5. Equipment clearance groove and
slag suction device ensure unblocked, to prevent slag into pieces, affect the
production and safety.
6. Don't long time continuous
cutting when using dry cutting saw blade, so as not to affect the use of the saw blade life.
