Home > News > Industry News > Why is there noise when the saw blade is working
Contact Us
Contact us: Fujian Nanan Boreway Machinery Co.,Ltd.,ADD: HuaHui Center, Shuitou Town,Quanzhou, Fujian, China,                 ...
Contact Now
Follow us
Latest News
  • The physical properties of diamond

    Diamond is one of the largest mineral hardness. Diamond can be divided into two categories according to the causes of natural and man-made. Natural di...
  • What is the thickness of the base of the ultra-thin saw blade?

    Ultra-thin diamond saw blade refers to high-precision special-purpose diamond cutting blade.According to different bonding agents, the production is divided into metal bonding agents, resin bonding agents and electroplated diamond cutting blades.
  • Production technology of diamond segment?

    The manufacturing process of BOREWAY mechanical diamond segment is divided into 5 steps, which are batching, mixing, cold pressing, hot pressing ...
  • What Is Lavina Quick Change Diamond Concrete Grinding Shoes?

    Descriptions: What Is Lavina Quick Change Diamond Concrete Grinding Shoes? Our Lavina diamond grinding shoes are mainly used for grinding concrete, a...
  • Profile Of Brazed

    Brazing is lower than the parent metal melting point of solder metal materials,will be heated to a temperature higher than the melting point solder, w...
  • The definition of the resin

    Resin is usually refers to the scope of heated after soften or melt, softenedunder the action of external force has a tendency to flow, when the tempe...
  • Why can not diamond blade machining steel?

    Above 800 degrees Celsius, the diamond powder dissolves in iron. Use of diamond cutting tool turning iron material, as a result of friction heat, diam...
  • Can 125mm bush hammer plate be used in concrete?

    Bush hammer plate can remove old epoxy coating, renovate different kinds of ground surface, and make antique effect. Effective and safe anti slip granite, granite, marble and concrete surfaces. Preparation for grinding and polishing of concrete before laying new layers.
  • What saw blades can cut jade?

    It is widely used for cutting gems, stone, and hard and brittle materials such as glass, ceramics, and graphite.
  • How To Choose The Right Grit For The Diamond Grinding Cup Wheel?

    Describe: How To Choose The Right Grit For The Diamond Grinding Cup Wheel? Diamond Grinding Cup Wheel metal bond diamonds have high strength, e...


Why is there noise when the saw blade is working

Dora Zhang 2021-04-14 16:53:19
Analysis of common problems of diamond saw blade cutting stone:

The diamond saw blade cannot cut: 

  • 1. Insufficient cutting edge;

  • 2.Insufficient power supply.

  • 3. The hardness of the cutter head is too large;

Wet Use Turbo Blade Porcelain Disc

The service life of diamond saw blade is short:

  • 1. Insufficient water supply;

  • 2. The voltage is unstable;

  • 3. The conveyor belt is slack;

  • 4. The ceramic saw blade in the correct range is not selected.

T Segment Less Chipping Diamond Cutting Disc

Diamond saw blade cutting noise is loud:

  • 1. Insufficient water supply;

  • 2. The material to be cut is not fixed.

  • 3. There is a problem with the speed setting;

  • 4. The width of the saw blade head is too small, causing friction between the substrate and the cutting material;

Circular Saw Blade for Ceramic)Diamond saw blade loses teeth:

  • 1. The material to be cut is not fixed in place;

  • 2. Sudden external impact encountered during cutting;

  • 3. The material problem of the material being cut (usually hardness);

  • 4. The temperature is too high due to the problem of insufficient water supply.