What should be paid attention to when using diamond bit?
Dora Zhang
2021-04-20 16:04:28
The boreway factory supply diamond bit can be divided into dry type(30mm diamond core drilling bits thread M14) and wet bit for ceramic tile, marble stone, concrete and other materials.
- In order to make the drill work normally and stably, the stabilizer should be replaced regularly. （Wet Diamond Core Drill Bits For Concrete）
- When operating in harsh geological environment, the axial pressure and rotation speed should be reduced to prevent the bit from breaking
- It is strictly forbidden to use the bent drill pipe to avoid the damage of the drill due to uneven stress, which will affect the normal service time.
- During normal operation, it is strictly forbidden to change the running direction suddenly to prevent the bit head from falling off. （Braze For Welding Segment On Core Barrels）
- During normal operation, the main air path of the air compressor shall not have air leakage, and sufficient air volume and air pressure shall be ensured to prolong the service life of the PDC bit.
- When in use, take out the drill from the packing box and install it into the spring chuck of the spindle or the tool library of the automatic replacement drill. Put it back into the packing box immediately after use
