Casa > notizia > Industria Notizie > What is the design principle of diamond segment?
Contattaci
Contattaci: Fujian Nanan Boreway Machinery Co.,Ltd., Aggiungi: Huahui Center, Shuitou Town, Quanzhou, Fujian, China, ...
Contatta ora
Seguici
Ultime notizie

Notizia

What is the design principle of diamond segment?

Dora Zhang 2022-05-30 17:08:10
The diamond bit consists of fan-shaped, rectangular, M-shaped, K-shaped, W-shaped, T-shaped,flat segment for gang saw.

And other superhard materials composed of diamond with different shapes and matrix materials, which are used for welding on common stone processing tools and can be replaced at any time, which can not only save the processing cost of the stone factory, but also be easy to maintain stone processing tools.

Diamond marble cutting segment is welcomed on the substrate of gang saw with uniform size, which is helpful to improve the cutting speed

Diamond cutter head, also known as sawtooth, is a diamond tool used in cutting, grinding, drilling and milling. It is generally used alone. It can be welded to the matrix of the row saw to form the row saw, and can also be welded to the matrix of the saw blade, drill bit, metal chassis, bowl mill and other substrates.

When the diamond gang saw segment for marble block is welled on the saw blade matrix, the gap between the cutter heads will not be too large The gap can allow the buffer transition between the cutter head and the cutter head, which is conductive to extending the service life of the cutter head and reducing the purchase cost of the enterprise

In stone processing, most grinding, drilling and cutting processes are completed by diamond cutter head, which is the most important part.

The diamond bit consists of three parts: diamond particles, matrix material and sandwich material.

The interlayer material is divided into powder interlayer and iron slice interlayer. This is a process improvement to improve the sharpness of the tool head. Not all tool heads need this part of the material. Because the requirements for the holding power of diamond are very high, a little carelessness will cause the diamond to fall off. Therefore, this kind of interlayer tool head is also a processing process that is difficult for many diamond tool manufacturers to control.

We also provide cutter heads for cutting granite, marble, ash, ceramic tile, concrete and refinery materials, including M-shape, K-shape, tape shape, flat shape, T-shape, U-shape, etc